政大機構典藏-National Chengchi University Institutional Repository(NCCUR):Item 140.119/100763
English  |  正體中文  |  简体中文  |  Post-Print筆數 : 27 |  全文筆數/總筆數 : 109953/140892 (78%)
造訪人次 : 46225691      線上人數 : 654
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋
    政大機構典藏 > 商學院 > 企業管理學系 > 期刊論文 >  Item 140.119/100763


    請使用永久網址來引用或連結此文件: https://nccur.lib.nccu.edu.tw/handle/140.119/100763


    題名: Using On-line Sensors in Statistical Process Control
    作者: 唐揆
    Gong, L.;Jwo, W.;Tang, Kwei
    貢獻者: 企管系
    關鍵詞: Economic Models;On-Line Sensor;Statistical Process Control
    日期: 1997-07
    上傳時間: 2016-08-25 15:52:52 (UTC+8)
    摘要: As manufacturing technology moves toward more computerized automation, statistical process control (SFC) techniques must adapt to keep pace with the new environment and take advantage of the development in automated on-line sensors. In this paper, a two-phase procedure is proposed for combining an on-line sensor and a control chart to improve statistical process control decisions. In phase I of this procedure, a production process is monitored continually by a sensor. When a sensor warning signal is observed, phase 2 takes place: A sample of items is drawn from the process and inspected. If the sample mean is outside the predetermined control limits, the process is stopped, and a search is initiated to determine the actual process status for possible necessary adjustment. If the sample mean is within the control limits, the process continues. A mathematical model is formulated for jointly determining the sample size and the control limit of the control chart and a decision rule for sending out sensor warning signals. The model is based on the assumption that there is only a weak relationship between the sensor measurement and the process condition. A solution algorithm based on a numerical search is developed. A numerical example is used to show the advantage of the proposed model over the models based separately on the sensor and the control chart and a sensitivity analysis is used to show the effects of several important model parameters on the optimal solution.
    關聯: Management Science, 43(7), 1017-1029
    資料類型: article
    顯示於類別:[企業管理學系] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    1017-1029.pdf1847KbAdobe PDF2467檢視/開啟


    在政大典藏中所有的資料項目都受到原著作權保護.


    社群 sharing

    著作權政策宣告 Copyright Announcement
    1.本網站之數位內容為國立政治大學所收錄之機構典藏，無償提供學術研究與公眾教育等公益性使用，惟仍請適度，合理使用本網站之內容，以尊重著作權人之權益。商業上之利用，則請先取得著作權人之授權。
    The digital content of this website is part of National Chengchi University Institutional Repository. It provides free access to academic research and public education for non-commercial use. Please utilize it in a proper and reasonable manner and respect the rights of copyright owners. For commercial use, please obtain authorization from the copyright owner in advance.

    2.本網站之製作，已盡力防止侵害著作權人之權益，如仍發現本網站之數位內容有侵害著作權人權益情事者，請權利人通知本網站維護人員(nccur@nccu.edu.tw)，維護人員將立即採取移除該數位著作等補救措施。
    NCCU Institutional Repository is made to protect the interests of copyright owners. If you believe that any material on the website infringes copyright, please contact our staff(nccur@nccu.edu.tw). We will remove the work from the repository and investigate your claim.
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋