English  |  正體中文  |  简体中文  |  Post-Print筆數 : 27 |  全文笔数/总笔数 : 111315/142224 (78%)
造访人次 : 48367672      在线人数 : 784
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    请使用永久网址来引用或连结此文件: https://nccur.lib.nccu.edu.tw/handle/140.119/35088


    题名: 台灣高科技產業內部策略導向對新產品上市策略與績效影響之研究
    作者: 陳建銘
    Chen ,Chien-Ming
    贡献者: 陳建維
    陳建銘
    Chen ,Chien-Ming
    关键词: 策略性上市策略
    產品新穎度
    產品定位
    上市時機
    市場導向
    技術機會主義
    競食意願
    日期: 2003
    上传时间: 2009-09-18 14:07:59 (UTC+8)
    摘要: 高科技產業是台灣最重要的產業,對台灣經濟有很大的貢獻,近年來此產業的競爭日趨激烈,新科技迅速不斷的出現,產品生命週期的急遽縮短,以及市場需求的反覆變動,使得廠商在上市新產品之前,必須要審慎考量並擬定適當的上市策略,才能增加新產品上市後的成功率。

    本研究選取「產品新穎度決策」、「產品定位」以及「上市時機」為討論的上市策略組合,探究不同的上市策略與新產品績效之間的關係,而從過去相關的文獻當中,亦發現公司內部的態度傾向是影響上市策略擬定的因素之一,故本研究亦將公司內部因素納入研究架構中,選擇「市場導向」、「技術機會主義」與「競食意願」三變數,分析三者對於上市策略擬定的影響性,並進一步分析其對新產品績效可能的影響。

    針對本研究所回收之有效問卷所作之分析,得到以下幾項實証:
    一、市場導向強度越強,則在產品新穎度決策上越傾向較低的新穎度。
    二、市場導向強度越強,越能適當的掌握新產品之上市時機。
    三、技術機會主義程度越高,則產品定位決策上高質感的程度越不明顯。
    四、競食意願越高,在上市時機的掌握上越為準確適時。
    五、產品新穎的程度,與新產品績效表現呈負相關。
    六、上市時機掌握的越為準確,新產品績效表現越佳。
    七、市場導向的強度越強,新產品績效表現越佳。
    八、技術機會主義程度越高,新產品績效表現越佳。
    九、競食意願越高,新產品績效表現越佳。

    由於過去的研究較少著墨於影響上市策略擬定的因素上,而本研究的實証也發現公司內部因素不僅會影響上市策略的擬定,甚至是直接的關係到新產品上市後之績效,本研究的結果可提供給企業參考,希望能對新產品上市相關領域能有所貢獻。
    參考文獻: 中文部分
    1.司徒達賢 (民84),策略管理,台北,遠流出版公司。
    2.林秋霞 (民92),「技術機會主義與公司績效之關係」,國立政治大學國際貿易研究所碩士論文。
    3.林隆橋、羅文坤、鄭英傑 (民80),新產品行銷策略,台北,超越企管股份有限公司。
    4.倪有康 (民91),「公司內外情境因素與新產品上市策略行為之研究」,國立政治大學國際貿易研究所碩士論文。
    5.孫震 (民85),「台灣科技產業之發展」,1996海峽兩岸暨香港地區經貿研討會之專題報告。
    6.許士軍 (民72),現代行銷管理,台北,商務印書館。
    7.張宗凱 (民88),「高科技標竿政策因素之初探」,國立政治大學資訊管理研究所碩士論文。
    8.張忠謀 (民87),「邁向科技化國家的策略─談政府與企業應有的努力方向」,第五屆經營者大會專題演講稿。
    9.楊玉玲 (民90),「高科技產業分析架構之建立─以無線通訊服務為例」,國立政治大學企業管理研究所碩士論文。
    10.鄭竹君 (民91),「新產品上市活動對競食效果之影響」,國立政治大學國際貿易研究所碩士論文。
    11.蔡宏明 (民88),「我國高科技產業發展面對的挑戰與因應對策」,經濟情勢暨評論季刊第五卷第一期。
    12.賴士葆 (民79),研究發展/行銷/製造三部門互動與新產品開發績效相關之研究,台北,華泰書局。
    英文部分
    1.Aaker, D. A. (1991), Managing Brand Equity, NY: The free Press.
    2.Ali, A. (1994), “Pioneering Versus Incremental Innovations: Review and Research Propositions,” Journal of Product Innovation Management, 10, 46-61.
    3.Atuahene –Gima, Kwaku (1995), “An Exploratory Analysis of the Impact of Market Orientation on New Product Performance: A Contingency Approach,” Journal of Product Innovation Management, 12, 275-93.
    4.Baker, M. J., C. D. Black, and S. J. Hart (1988), “The Competitiveness of British Industry: What Really Makes the Difference?” European Journal of Marketing, 22(2), 70-85.
    5.Benedetto, C. A. (1999), “Identifying the Key Success Factors in New Product Launch,” Journal of Product Innovation Management, 16(November), 530-44.
    6.Biggadike, R. E. (1979), “The Risky Business of Diversification,” Harvard Business Review, May/June, 103-11.
    7.Bollen, K. A. (1989), Structural Equations with Latent Variables, NY: John Wiley.
    8.Booz, Allen and Hamilton (1982), New Product Management for the 1980’s. NY: Booz, Allen and Hamilton Inc.
    9.Boretsky, Michael(1982),”The Role of innovation,” Challenge, Armonk: Nov/Dec, Vol. 23, Iss. 5, p.9
    10.Buday, Tom (1989), “Capitalizing on Brand Extensions,” The Journal of Consumer Marketing, 6(4), 27-30.
    11.Calantone, R. J. and M. M. Montoya-Weiss (1993), “Product Launch and Follow-on,” In: Managing New Technology Development. William E. Souder and J. Daniel Sherman (eds.). NY: McGraw-Hill, 217-48.
    12.------, J. B. Schmidt, and X. M. Song (1996), “Controllable Antecedents of New Product Success: A Cross-national Comparison,” Marketing Science, 15(4), 341-58.
    13.Chandy, R. K. and G. J. Tellis (1998), “Organizing for Radical Product Innovation: The Overlooked Role of Willingness to Cannibalize,” Journal of Marketing Research, 19(4), 474-87.
    14.Christensen, C. M. (1997), The Innovators’ Dilemma. Boston: Harvard Business School Press.
    15.Cooper, R. G. (1979), “The Dimension of Industrial New Product Success and Failure,” Journal of Marketing, 43(3), 93-103.
    16.------ (1993), Winning at New Products: Accelerating the Process from Idea to Launch, Reading, MA: Addision-Wesley.
    17.------ and E. J. Kleinschmidt (1986), “An Investigation into the New Product Process: Steps, Deficiencies, and Impact,” Journal of Product Innovation Management, 3(2), 71-86.
    18.Cordero, R. (1991), “Managing for Speed to Avoid Product Obsolescence: A Survey of Techniques,” Journal of Product Innovation Management, 8(December), 283-94.
    19.Crawford, C. M. (1984), “Protocol: New Tool for Product Innovation,” Journal of Product Innovation Management, 2, 85-91.
    20.------ (1994), New Products Management, 4th edition, Burr Ridge, IL: Irwin.
    21.Danneels, E. and E. J. Kleinschmidt (2001), “Product Innovativeness from Firm Perspectives: Its Dimensions and Their Relation with Project Selection and Performance.” Journal of Product Innovation Management 18, 357-73.
    22.Deshpande, R. and F. E. Webster (1989),”Organizational Culture and Marketing: Defining the Research Agenda,” Journal of Marketing, 53(January), 3-5.
    23.Greenley, G. E. (1995), “Forms of Market Orientation in UK Companies,” Journal of Management Studies, 32(January), 47-66.
    24.Griffin, A. (1997), “The effect of project and process characteristic on product development cycle time,” Journal of Marketing Research, 34(February), 24-35.
    25.Grupp, H., G. Munt, and U. Schmoch (1996), “Knowledge-Intensive and Resource-Concerned Growth in Germany,” Research Evaluation, 6(August), 96-104.
    26.Guitltinan, J. P. (1999), “Launch Strategy, Launch Tactics, and Demand Outcomes,” Journal of Product Innovation Management, 16(November), 509-29.
    27.Hair, J. F., E. A. Rolph, L. T. Ronald, and C. B. William (1995), Multivariate Data Analysis with Reading, 4th edition, NY: Prentice-Hall.
    28.Heskett, J. (1976), Marketing, NY: Macmillan.
    29.Hisrich, R. O. and M. L. Peters (1986), Marketing A New Product: Its Planning, Development and Control, CA: The Benjamin/Cummings Publishing Company Inc.
    30.Hultink, E. J., A. Griffin, S. Hart, and H. S. J. Robben (1997), “Industrial New Product Launch Strategies and Product Development Performance,” Journal of Product Innovation Management, 14, 243-57.
    31.------, ------, H. S. J. Robben, and S. Hart (1998), “In search of Generic Launch Strategies for New Products,” International Journal of Research in Marketing, 15(July), 269-85.
    32.------, S. Hart, H. S. J. Robben, and A. Griffin (2000), “Launch Decision and New Product Success: An Empirical Comparison of Consumer and Industrial Products,” Journal of Product Innovation Management, 17, 5-23.
    33.Jakki Mohr (2001), Marketing of High-Technology Products and Innovations. Upper Saddle River, NJ: Prentice-Hall.
    34.Jaworski, B. J. and A. K. Kohli (1993), “Market Orientation: Antecedents and Consequences,” Journal of Marketing, 57, 53-70.
    35.Kohli, A. K. and B. J. Jaworski (1990), “Market Orientation: The Construct, Research Propositions, and Managerial Implication,” Journal of Marketing, 54(April), 1-18.
    36.Kolter, P. (1988), Marketing Management: Analysis, Planning, Implementation, and Control. 6th edition, Englewood Cliffs, NJ: Prentice-Hall.
    37.Kuczmarski, T. D. (1998), Managing New Product, NJ: Prentice-Hall.
    38.Levitt, T. (1965), “Exploit the Product Life Cycle,” Harvard Business Review, November/December, 81-94.
    39.Mason, C. H. and G. R. Milne (1994), “An Approach for Identifying Cannibalization within Product Line Extension and Multi-Brand Strategies,” Journal of Marketing, 31, 163-70.
    40.Menon, A., S. G. Bharadwaj, and R. Howell (1996), “The Ouality and Effectiveness of Marketing Strategy: Effects of Functional and Dysfunctional Conflict in Intra-Organizational Relationships,” Journal of the Academy of Marketing Science, 24(Fall), 299-313.
    41.Miller, D. (1987 Jan.), “The Structural and Environmental Correlates of Business Strategy,” Strategic Management Journal, 8(1), 55-76.
    42.Millson, M., S. P. Raj, and D. Wilemon (1992), ”A Survey of Major Approaches for Accelerating New Product Development,” Journal of Product Innovation Management, 9(March), 53-69.
    43.Narver, J. C. and S. F. Slater (1990), “The Effect of a Market Orientation on Business Profitability,” Journal of Marketing, 54(October), 20-36.
    44.Nasibeet, John (1982), Megatrends, NY: Warner Books.
    45.Nault, B. and M. Vandenbosch (1996), “Eating Your Own Lunch: Protection through Preemption,” Organizational Science, 7(May), 342-58.
    46.Nunnally, J. C. (1978), Psychometric Theory, 2nd Edition, NY: McGraw Hill Inc.
    47.Rochford, L. (1991), “Generating and Screening New Product Ideas,” Industrial Marketing Management, 20(November), 287-97.
    48.Sampson, P. (1970), “Can Consumer Create New Products.” Journal of Marketing Research Society, 12(1), 40-52.
    49.Shanklin, W. L. and Jr. Ryans (1984), ”Marketing High Technology,” Strategy Management Journal, 3, 35-52.
    50.Sherman, B.(1982), ”Successful Marketing Strategy for High Tech Firms,” Journal of Retailing, 58, 25-43.
    51.Song, X. M. and M. M. Montoya-Weiss (2001), “The Effect of Perceived Technological Uncertainty on Japanese New Product Development,” Academy of Management Journal, 44(February):61-80.
    52.------ and M. E. Parry (1997), “A Cross-national Comparative Study of New Product Development Process: Japan and the United States,” Journal of Marketing, 61(April), 1-18.
    53.Souder, W. E. (1988), “Managing Relation between R&D and Marketing in New Product Development Projects,” Journal of Product Innovation Management, 5(3), 6-14.
    54.Srinvasan, R., G. L. Lilien and A. Rangaswamy (2002), “Technological Opportunism and Radical Technology Adoption: An Application to E-Business,” Journal of Marketing, 66(July), 47-60.
    55.Teresa, J. D. and S. U. Lynette (1987), “Emerging Positioning Strategies in Global Marketing,” Journal of Consumer Marketing, 4(Fall), 23-40.
    56.Urban, G. L. and J. R. Hauser (1993), Design and Marketing of New Product. Englewood Cliffs, NJ: Prentice Hall.
    57.Wind, J., V. Mahajan, and J. L. Bayless (1990), The Role of New Product Models in Supporting and Improving the New Product Development Process: Source Preliminary Results, Cambridge, MA: The Marketing Science Institute.
    58.Lee, Y. and G. C. O’Connor (2003), “The Impact of Communication Strategy on Launching New Products: The Moderating Role of Product Innovativeness,” Journal of Product Innovation Management, 20, 4-21.
    描述: 碩士
    國立政治大學
    國際經營與貿易研究所
    91351009
    92
    資料來源: http://thesis.lib.nccu.edu.tw/record/#G0091351009
    数据类型: thesis
    显示于类别:[國際經營與貿易學系 ] 學位論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    35100901.pdf41KbAdobe PDF2831检视/开启
    35100902.pdf131KbAdobe PDF2798检视/开启
    35100903.pdf125KbAdobe PDF2852检视/开启
    35100904.pdf104KbAdobe PDF2933检视/开启
    35100905.pdf203KbAdobe PDF2961检视/开启
    35100906.pdf442KbAdobe PDF23711检视/开启
    35100907.pdf333KbAdobe PDF21247检视/开启
    35100908.pdf279KbAdobe PDF21051检视/开启
    35100909.pdf299KbAdobe PDF21017检视/开启
    35100910.pdf250KbAdobe PDF21713检视/开启
    35100911.pdf177KbAdobe PDF21181检视/开启
    35100912.pdf315KbAdobe PDF2869检视/开启


    在政大典藏中所有的数据项都受到原著作权保护.


    社群 sharing

    著作權政策宣告 Copyright Announcement
    1.本網站之數位內容為國立政治大學所收錄之機構典藏,無償提供學術研究與公眾教育等公益性使用,惟仍請適度,合理使用本網站之內容,以尊重著作權人之權益。商業上之利用,則請先取得著作權人之授權。
    The digital content of this website is part of National Chengchi University Institutional Repository. It provides free access to academic research and public education for non-commercial use. Please utilize it in a proper and reasonable manner and respect the rights of copyright owners. For commercial use, please obtain authorization from the copyright owner in advance.

    2.本網站之製作,已盡力防止侵害著作權人之權益,如仍發現本網站之數位內容有侵害著作權人權益情事者,請權利人通知本網站維護人員(nccur@nccu.edu.tw),維護人員將立即採取移除該數位著作等補救措施。
    NCCU Institutional Repository is made to protect the interests of copyright owners. If you believe that any material on the website infringes copyright, please contact our staff(nccur@nccu.edu.tw). We will remove the work from the repository and investigate your claim.
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈