政大機構典藏-National Chengchi University Institutional Repository(NCCUR):Item 140.119/95265

政大機構典藏-National Chengchi University Institutional Repository(NCCUR):Item 140.119/95265

English | 正體中文 | 简体中文 | Post-Print筆數 : 27 | 全文筆數/總筆數 : 109952/140887 (78%)
造訪人次 : 46283099 線上人數 : 1277

RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.

搜尋範圍

查詢小技巧：

您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果

若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料

進階搜尋

主頁 ‧ 登入 ‧ 上傳 ‧ 說明 ‧ 關於政大典藏 ‧ 管理

到手機版

政大機構典藏 > 資訊學院 > 資訊科學系 > 學位論文 > Item 140.119/95265

請使用永久網址來引用或連結此文件: https://nccur.lib.nccu.edu.tw/handle/140.119/95265

題名:	使用光束調整法與多張影像做相機效正與三維模型重建 Using bundle adjustment for camera Calibration and 3D reconstruction from multiple images
作者:	蔡政君 Tsai, Jeng Jiun
貢獻者:	何瑁鎧 Hor, Maw Kae 蔡政君 Tsai, Jeng Jiun
關鍵詞:	影像處理極限幾何對應點補綴面再投影誤差 image processing epipolar geometry corresponding points sparse bundle adjustment patch normalized cross correlation reprojection error
日期:	2009
上傳時間:	2016-05-09 15:29:03 (UTC+8)
摘要:	自動化三維建模需要準確的三維點座標，而三維點的位置則依賴高精度的對應點，因此對應點的尋找一直是此領域的研究議題，而使用稀疏光束調整法(SBA：Sparse Bundle Adjustment)來優化相機參數也是常用的作法，然而若三維點當中有少數幾個誤差較大的點，則稀疏光束調整法會受到很大的影響。我們採用多視角影像做依據，找出對應點座標及幾何關係，在改善對應點位置的步驟中，我們藉由位移三維點法向量來取得各種不同位置的三維補綴面(3D patch)，並根據投影到影像上之補綴面的正規化相關匹配法(NCC：Normalized Cross Correlation)來改善對應點位置。利用這些改善過的點資訊，我們使用稀疏光束調整法來針對相機校正做進一步的優化，為了避免誤差較大的三維點影響到稀疏光束調整法的結果，我們使用穩健的計算方法來過濾這些三維點，藉由此方法來減少再投影誤差(reprojection error)，最後產生較精準的相機參數，使用此參數我們可以自動化建出外型架構較接近真實物體的模型。 Automated 3D modeling of the need for accurate 3D points, and location of the 3D points depends on the accuracy of corresponding points, so the search for corresponding points in this area has been a research topic, and the use of SBA(Sparse Bundle Adjustment) to optimize the camera parameters is also a common practice, however, if there are a few more error 3D points, the SBA will be greatly affected. In this paper, we establish the corresponding points and their geometry relationship from multi-view images. And the 3D patches are used to refine point positions. We translate the normal to get many patches, and project them into visible images. The NCC(Normalized Cross Correlation) values between patches in reference image and patches in visible image are used to estimate the best correspondence points. And they are used to get better camera parameters by SBA(sparse bundle adjustment). Furthermore, it is because that it usually exist outliers in the data observed, and they will influence the results by using SBA. So, we use our robust estimation method to resist the outliers. In our experiment, SBA is used to filter some outliers to reduce the reprojection error. After getting more precise camera parameters, we use them to reconstruct the 3D model more realistic.
參考文獻:	[1] Al-Hanbali, N. and B. Sadoun, “3D GIS Modeling of BAU: Planning Prospective and Implementation Aspects”, IEEE/ACS International Conference on Computer Systems and Applications, pp.566-571, 2007. [2] Bouguet, J.-Y., Camera calibration toolbox for matlab. [3] Furukawa, Y. and J. Ponce, “Accurate Camera Calibration from Multi-View Stereo and Bundle Adjustment”, IEEE Conference on Computer Vision and Pattern Recognition, pp.1-8, 2008. [4] Furukawa, Y. and J. Ponce, “Accurate, Dense, and Robust Multi-View Stereopsis”, IEEE Conference on Computer Vision and Pattern Recognition, 2007. [5] Furukawa Y. and J. Ponce, PMVS (http://wwwcvr.ai.uiuc.edu/~yfurukaw/research/pmvs). [6] Hartley, R. I. and A. Zisserman, Multiple View Geometry in Computer Vision, Cambridge University Press, 2003. [7] Lourakis, M. and A. Argyros, SBA: A Generic Sparse Bundle Adjustment C/C++ Package Based on the Levenberg- Marquardt Algorithm (http://www.ics.forth.gr/~lourakis/sba/). [8] Martinec, D. and T. Pajdla, “Robust Rotation and Translation Estimation in Multiview Reconstruction”, IEEE conference on Computer Vision and Pattern Recognition, 2007. [9] Paolo, C., C. Marco, C. Massimiliano, G. Fabio, and R. Guido, MeshLab(http://meshlab.sourceforge.net/). [10] Seitz, S. M., B. Curless, J. Diebel, D. Scharstein, and R. Szeliski, Multi-View Stereo Evaluation(http://vision.middlebury.edu/mview/). [11] Tang, C.-Y., H.-L. Chou, Y.-L. Wu, and Y.-H. Ding, “Robust Fundamental Matrix Estimation Using Coplanar Constraints”, International Journal of Pattern Recognition and Artificial Intelligence, pp.783-805, 2008. [12] Tang, C.-Y., Y.-L. Wu, and Y.-H. Lai, “Fundamental Matrix Estimation Using Evolutionary Algorithms with Multi-Objective Functions”, Journal of Information Science and Engineering, pp.785-800, 2008. [13] Tang, C.-Y., Y.-L. Wu, Maw-Kae Hor, and Wen-Hung Wang, “Modified SIFT Descriptor for Image Matching under Interference”, International Conf. Machine Learning and Cybernetics, pp.3294-3300, 2008. [14] 賴易進，"由地圖建構城市三維模型"，國立政治大學資訊科學系碩士論文，台北，民國95年11月。 [15] 詹凱軒，"由地面光達資料自動重建建物模型之研究"，國立政治大學資訊科學系碩士論文，台北，民國96年7月。
描述:	碩士國立政治大學資訊科學學系 96753002
資料來源:	http://thesis.lib.nccu.edu.tw/record/#G0096753002
資料類型:	thesis
顯示於類別:	[資訊科學系] 學位論文

文件中的檔案:

檔案	大小	格式	瀏覽次數
index.html	0Kb	HTML2	283	檢視/開啟

在政大典藏中所有的資料項目都受到原著作權保護.

社群 sharing

著作權政策宣告 Copyright Announcement

1.本網站之數位內容為國立政治大學所收錄之機構典藏，無償提供學術研究與公眾教育等公益性使用，惟仍請適度，合理使用本網站之內容，以尊重著作權人之權益。商業上之利用，則請先取得著作權人之授權。
The digital content of this website is part of National Chengchi University Institutional Repository. It provides free access to academic research and public education for non-commercial use. Please utilize it in a proper and reasonable manner and respect the rights of copyright owners. For commercial use, please obtain authorization from the copyright owner in advance.

2.本網站之製作，已盡力防止侵害著作權人之權益，如仍發現本網站之數位內容有侵害著作權人權益情事者，請權利人通知本網站維護人員(nccur@nccu.edu.tw)，維護人員將立即採取移除該數位著作等補救措施。
NCCU Institutional Repository is made to protect the interests of copyright owners. If you believe that any material on the website infringes copyright, please contact our staff(nccur@nccu.edu.tw). We will remove the work from the repository and investigate your claim.

DSpace Software Copyright © 2002-2004 MIT & Hewlett-Packard / Enhanced by NTU Library IR team Copyright © - 回饋